Does a skylight need a curb?
On a low slope roof, yes. The home code says a unit skylight on a roof pitched less than 3 in 12 must sit on a curb at least 4 inches above the roof, unless the maker’s installation instructions say otherwise. On steeper roofs this curb rule does not apply.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Residential Code covers this in section R308.6.8 of chapter 3.
- Roof pitch: less than 3 units up in 12 across.
- Curb height: at least 4 inches above the plane of the roof.
- Override: the manufacturer’s installation instructions can specify otherwise.
- Commercial: a 4 inch curb under 45 degrees of slope, with a curbless option for homes at 3 in 12 or more.
Replacing the glass only
When only the glass or sealed unit is replaced, the existing curb and frame stay, so this rule matters most for new skylights. Measure the glass inside the frame, note whether it is flat or domed, and photograph the label if the frame has one. If the roof was redone with thicker layers, check that the curb still stands at least 4 inches above the new surface. Bring the roof pitch if you know it.
Read tempered vs laminated glass, or see skylight glass replacement for a free estimate.
Related questions
Skylight glass to replace?
Send us a photo for a free estimate, or call (202) 600-6220.