What kind of screen goes under skylight glass?
The home code asks for a screen that can carry twice the weight of the glass, fastened firmly to the framing, set within 4 inches of the glass, with mesh openings no bigger than 1 inch by 1 inch. Its job is to catch falling glass if a pane breaks.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Residential Code covers this in section R308.6.7 of chapter 3.
- Strength: twice the weight of the glazing, fastenings included.
- Fastening: firmly fastened to the framing members.
- Gap: within 4 inches of the glass.
- Mesh: openings 1 inch by 1 inch at most.
The screen must sit below the full area of the glass, not just part of it. The commercial code adds that its screens be noncombustible and no thinner than 12 gauge wire.
If the screen is missing
Some skylights were never fitted with a screen, or lost it in a remodel. If the glass is tempered or heat strengthened and no exception fits, either add a screen that meets these four points or replace the inboard pane with laminated glass. Measure the glass area and the height of its top edge above the floor first, since small, low tempered panes may not need a screen.
Read tempered vs laminated glass, or see skylight glass replacement for a free estimate.
Related questions
- Does a skylight need a screen under the glass?
- Does a skylight need a curb?
- Do skylights need a label?
- Can a greenhouse roof use any glass?
- What glass can a commercial skylight use?
- All glass repair questions
From other topics
- Is heat strengthened glass the same as tempered glass? (how the two glass types differ)
Skylight missing its screen?
Send us a photo for a free estimate, or call (202) 600-6220.