Does a new window need flashing?
Yes. The home code requires corrosion resistant flashing at exterior window and door openings, lapped shingle style so water can’t reach the wall cavity or framing. It must reach the face of the siding or the water resistive barrier, and air sealing goes on the inside of the rough opening gap.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Residential Code covers this in sections R703.4 and R703.4.1 of chapter 7.
- Where: every exterior window and door opening.
- How: applied shingle fashion, each upper piece lapping the one below.
- Reach: to the exterior wall finish or the water resistive barrier.
- Method: the window maker’s instructions, a design professional’s detail, or another approved method.
- Air seal: around the opening, on the interior side of the rough opening gap.
When an old window comes out
Flashing sits behind the siding and trim, so it is put in as the window goes in. When an old window comes out, check the flashing at the sill, sides and head before the new one is set. Flashing tapes and liquid membranes used for this must meet their own national standards.
Read how to measure window glass, or see window replacement for a free estimate.
Related questions
- Do new windows have to be installed by the maker’s instructions?
- What does the label on a new window mean?
- What is pan flashing under a window or door?
- How are windows anchored in a brick or concrete wall?
- Do replacement windows need window opening control devices?
- All glass repair questions
From other topics
- Why does my sliding glass door leak when it rains? (a leaking sliding door)
- Does the gap around a new window have to be sealed? (the air seal inside)
Replacing a window?
Send us a photo and sizes for a free estimate, or call (202) 600-6220.