Does a commercial door need a landing on both sides?
Yes. The building code asks for a floor or landing on each side of a door, at the same level on both sides. Each landing must be at least as wide as the door, or the stair if that is wider, and at least 44 inches long in the direction of travel. Outside landings may slope only slightly.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Building Code covers landings in sections 1010.1.4 and 1010.1.5 of chapter 10.
- Same level: floor or landing on each side at the same elevation.
- Outside slope: no more than a quarter inch per foot.
- Finish materials: may differ in height by half an inch at most.
- Width: at least the width of the door or stair, whichever is greater.
- Open door: may not cut a required size by more than 7 inches.
Before a new storefront door goes in
A new door and frame are set to the floors that are there. Check that the outside slab still meets the inside floor at the same level, and see the threshold question for how high the sill may sit.
If the glass was broken, read what to do first, or see storefront glass installation for a free estimate.
Related questions
- How tall does a commercial door have to be?
- How hard should an exterior commercial door be to open?
- Can a sliding door be a commercial exit?
- Can a commercial exit door have two locks?
- Are flush bolts allowed on commercial double doors?
- All glass repair questions
From other topics
- How high can a commercial door threshold be? (how high the sill can sit)
- Do you need a landing outside an exterior door? (the rule for houses)
Planning a new storefront door?
Send us a photo for a free estimate, or call (202) 600-6220.