How high can a commercial door threshold be?
No more than 1/2 inch high. The ADA standards allow the first 1/4 inch to be a straight edge, and anything above that has to be beveled so a wheelchair or cart can roll over it. An existing threshold up to 3/4 inch can stay if both sides are beveled.
- Free estimates
- Open 24/7
- Hablamos español
What the ADA standards say
The U.S. Access Board publishes the ADA accessibility standards. Section 404.2.5 covers thresholds and points to section 303 for changes in level.
- Up to 1/4 inch: may be a straight vertical edge.
- From 1/4 to 1/2 inch: beveled, no steeper than 1 unit up for 2 across.
- Over 1/2 inch: needs a ramp, not a threshold.
- Existing or altered thresholds: up to 3/4 inch, beveled on each side.
Thresholds and glass doors
All glass storefront doors usually close over a low threshold or a floor closer cover. When a door sags on a worn pivot or closer, it can start to drag on the threshold. If you swap a threshold to stop drafts, check the new height first.
Read why a glass door gets hard to open, or see commercial glass door repair for a free estimate.
Related questions
- What is the most secure glass for a storefront?
- Does storefront glass have to be tempered?
- Why is my commercial door so hard to open?
- Do glass office partitions need safety glass?
- Can glass office partitions be fire rated?
- Does a storefront door need panic hardware?
- How high should a commercial door handle be?
- How wide does a commercial door have to be?
- Which way should a commercial door swing?
- All glass repair questions
From other topics
- Does a glass door need a kick plate for ADA? (the bottom 10 inches of the door)
- Does a commercial door need a landing on both sides? (the landing on each side)
Glass door dragging on the threshold?
Send us a photo for a free estimate, or call (202) 600-6220.