Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

What is a delayed egress lock?

A lock that holds an exit door for a short delay after someone pushes on it, while an alarm sounds, before it releases. The building code allows it in business, mercantile, storage and some other occupancies, but only in buildings fully sprinklered or with an approved smoke or heat detection system.

What the rule says

The 2021 International Building Code covers this in section 1010.2.13 of chapter 10.

  • Where: Groups B, F, I, M, R, S and U, plus small classrooms.
  • Building: fully sprinklered, or approved smoke or heat detection.
  • Releases: on sprinkler or detection activation and on power loss.
  • Sign: above the hardware, reading PUSH UNTIL ALARM SOUNDS or PULL UNTIL ALARM SOUNDS, with the delay.
  • One per path: an egress path passes through no more than one in most buildings.

Once started, the release can’t be stopped, and a signal sounds near the door. Rearming is by hand only.

Common uses

Stores use delayed egress on back exits to discourage theft through a door that must stay openable. The lock, the alarm and the sign go together, so a door with the hardware but no sign, or a sign over the wrong door, needs attention.

Read what to do when storefront glass breaks overnight, or see commercial glass door repair for a free estimate.

We serve Northern Virginia, the Maryland suburbs and Washington, DC.

Back exit hardware to replace?

Send us a photo for a free estimate, or call (202) 600-6220.