Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

Does a glass door need a kick plate for ADA?

Not always. The ADA standards ask swinging doors for a smooth push side across the bottom 10 inches, the full width of the door. A frameless tempered glass door is exempt from the 10 inch height if its bottom rail has a top edge tapered at 60 degrees or more.

What the ADA standards say

The U.S. Access Board publishes the ADA accessibility standards; section 404.2.10 covers door surfaces.

  • The rule: smooth push side, full door width, within 10 inches of the floor.
  • Joints: parts within 1/16 inch of the same plane.
  • Kick plates: any cavity an added plate creates must be capped.
  • Exempt: sliding doors, doors that stop more than 10 inches above the floor, and frameless tempered doors with a tapered bottom rail.

Framed glass storefront doors

A framed aluminum door with a narrow bottom rail and glass that starts low is where this rule bites. Existing doors can stay as they are, but a new door or a new kick plate must meet it. A wider bottom rail or a full width plate does the job.

If a storefront door was broken, read what to do first, or see storefront glass repair for a free estimate.

Storefront door rail or glass damaged?

Send us a photo for a free estimate, or call (202) 600-6220.