Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

How wide does a commercial door have to be?

At least 32 inches of clear opening. That is measured from the face of the open door to the stop on the other side, with the door swung to 90 degrees, not across the door slab. On a pair of doors with no center post, one leaf alone has to give the 32 inches.

What the ADA standards say

The U.S. Access Board publishes the ADA accessibility standards; section 404.2.3 sets the clear width of doors.

  • Clear width: 32 inches minimum, door open 90 degrees.
  • Deep openings: 36 inches minimum where the doorway is more than 24 inches deep.
  • Below 34 inches: nothing may stick into the opening.
  • From 34 to 80 inches: handles, push bars and other parts may stick in no more than 4 inches.

The International Building Code uses the same 32 inch figure and asks for at least 80 inches of height.

Why a 36 inch door is common

The door leaf is wider than the opening it leaves, because the door and its stop take up room when open. That is why storefront doors are often 36 inches wide.

If storefront glass was broken, read what to do first, or see storefront glass installation for a free estimate.

Planning a new storefront door?

Send us the opening sizes for a free estimate, or call (202) 600-6220.