What glass is used for a racquetball court wall?
The building code asks racquetball and squash court glass walls to stay whole after a test impact at 59 inches above the playing surface, and to bend no more than 1 1/2 inches where they are hit. Glass doors in the court must also stay whole, and move little against the wall beside them.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Building Code covers this in section 2408.2 of chapter 24.
- Test height: impacts at 59 inches above the playing surface.
- Test setup: the same fixtures, fittings and assembly used on the real court.
- Walls: stay whole, and bend 1 1/2 inches at most for the set drop height.
- Doors: stay whole when hit in the center.
- Door edge: moves against the wall no more than the wall thickness plus half an inch.
These rules also cover similar uses where glass walls take hits during play.
Replacing a court panel
Because the whole wall system is tested together, a new panel should match the glass, fittings and fixings the wall was tested with. Keep the details of the original system if you have them.
Read tempered vs laminated glass, or see custom glass for a free estimate.
Related questions
- Does glass in a gym need to be safety glass?
- What glass is used for a glass floor?
- What glass can be used in an elevator?
- Does every pane of commercial glass need a label?
- Does a frameless glass wall need an engineer?
- All glass repair questions
From other topics
- Is heat strengthened glass the same as tempered glass? (how tempered glass differs from heat strengthened)
Court glass cracked?
Send us a photo and the panel size for a free estimate, or call (202) 600-6220.