Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

Does a frameless glass wall need an engineer?

Often, yes. Where one or more sides of a pane are not firmly supported, the building code asks for detailed drawings and analysis or test data prepared by a registered design professional. The same applies to glass under unusual loads. Glass set in a frame that meets the code’s stiffness limits counts as firmly supported.

What the code says

The International Building Code covers this in sections 2403.2 to 2403.4 of chapter 24.

  • Unsupported edges: drawings, shop drawings and analysis or test data by a registered design professional.
  • Firmly supported: the frame bends no more than 1/175 of the glass edge length, for edges up to 13 feet 6 inches.
  • Longer edges: 1/240 of the length plus a quarter inch.
  • Inside, beside a walkway: two free edges side by side may not bend apart more than the glass thickness under the set test load.

Before ordering a frameless wall

Ask early whether the job needs drawings from a design professional, since the glass thickness and fittings follow from that design. Keep a copy of the approved drawings with the building records for later glass work.

Read glass partitions vs drywall, or see glass office partitions for a free estimate.

Planning a glass wall?

Send us the layout and photos for a free estimate, or call (202) 600-6220.