Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

How thick is glass block?

A standard glass block is at least 3 7/8 inches thick, says the home code. Thin units are at least 3 1/8 inches if hollow or 3 inches if solid. Hollow blocks must be partially evacuated with glass faces averaging at least 3/16 inch, and reclaimed blocks can’t be used.

What the code says

The International Residential Code covers this in sections R607.2 and R607.3 of chapter 6.

  • Standard units: 3 7/8 inches thick at least.
  • Thin hollow units: 3 1/8 inches at least.
  • Thin solid units: 3 inches at least.
  • Glass faces: an average of 3/16 inch at least.
  • Mortar faces: coated with polyvinyl butyral or latex based paint.

Why the type matters

Thin units come with tighter panel size limits than standard ones, and they can’t be used where the design wind pressure is over 20 pounds per square foot. Check which type you have before planning a new panel or an addition to one. The two types also differ inside: an interior panel can reach 250 square feet in standard block and 150 in thin.

Read bathroom window privacy glass, or see window glass repair for a free estimate.

Weighing glass block against a window?

Send us a photo for a free estimate, or call (202) 600-6220.