Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

How big can a glass block wall or window be?

An exterior panel of standard glass block can be up to 144 square feet at a design wind pressure of 20 pounds per square foot, says the home code. Thin units stop at 85 square feet outside. Inside, standard panels can reach 250 square feet and thin panels 150.

What the code says

The International Residential Code covers this in section R607.4 of chapter 6.

  • Exterior standard: 144 square feet, and 25 feet wide or 20 feet high between supports.
  • Exterior thin: 85 square feet, and 15 feet wide or 10 feet high.
  • Interior: 250 square feet standard, 150 thin, 25 feet wide or 20 high.
  • Other wind pressures: standard panel area follows the code’s wind load chart.

Curved panels need extra supports where a curve meets a straight run.

A bathroom or basement window

A block window 32 inches wide by 24 inches high covers about 5.3 square feet, far under any of these limits. The limits come into play on full walls and long runs, where the panel has to be broken up with structural supports. Measure the opening before you call.

Read bathroom window privacy glass, or see window glass repair for a free estimate.

Weighing glass block against a window?

Send us a photo for a free estimate, or call (202) 600-6220.