Glass Shower Door Sagging or Won't Close? Causes and Fixes
A glass shower door that sags, rubs the curb or will not close has almost always dropped on its hinges or pivots: the screws have loosened, the hinge has worn, or what the hinge is fixed into has given way. On a slider, it is usually the rollers. Most of the time it is a repair, not a new door, but on a heavy frameless door the hinges should not be loosened by hand while the glass is hanging. Here is how to find the cause for your type of door and what the fix involves.
- Shower door repair across the DMV
- Free estimates
- Hablamos español
Which kind of door do you have?
The cause, and the fix, depend on how the door is hung.
Thick glass on two or three clamp hinges fixed to the wall or a fixed panel. The glass is heavy, so any wear at the hinges shows as a drop at the handle side.
Framed or pivot door
A door in a metal frame that swings on pins at the top and bottom, or on a long hinge strip. Worn pivots or a loose frame let it drop and rub.
Panels hung on rollers along a top rail. When a roller wears or slips, the door rides low, drags or will not meet the wall.
What your door is doing, and why
Find the line that matches. If water is also getting out, the fix is often the same; see glass shower door leaking.
| What the door does | Most likely cause | The usual fix |
|---|---|---|
| Handle side has dropped and rubs the curb | Hinge screws loosened, or a hinge worn | Door lifted and set level, hinges tightened or replaced |
| Will not latch or meet the magnet strip | Door has dropped, or the strip has been knocked out of line | Door realigned; strip reset or replaced |
| Swings open or closed by itself | Door or wall out of plumb, or a self closing hinge worn | Door set plumb; hinge adjusted or replaced |
| Gap at the top or along the hinge side | Hinge pulling away from the wall | Check what the hinge is fixed into; refix into solid backing |
| Slider drags, rides low or jumps the track | Worn or broken roller, or roller set too low | New rollers, set to the right height |
| Framed door rubs at the bottom corner | Worn pivot, or the frame has moved | New pivot parts, frame refixed |
Safe checks you can do first
These need no tools beyond your eyes and a level, and they tell us a lot.
1. Watch the gap
Close the door slowly and look at the gap along the top and the handle side. A gap that is wider at the top on the hinge side, and tighter at the bottom on the handle side, means the door has dropped.
2. Look at the hinges
Check for a hinge that has rotated, a cracked hinge body, a gap between the hinge and the wall, or cracked tile or grout around it.
3. Check the glass edges
Look along the bottom and handle edges for chips where the glass has been rubbing. A chipped edge on tempered glass is a weak spot and should be looked at.
4. Slider: look at the rollers
From outside, look up at the top rail. A roller sitting crooked, missing a wheel or off the rail explains a door that drags.
What not to do on heavy glass
- Do not loosen the hinge screws on a frameless door while it is hanging. The glass can drop onto the curb or swing into the tile, and a knock on the edge of tempered glass can make it shatter.
- Do not force it shut past the point where it rubs. That grinds the bottom edge.
- Do not hang towels or weight on the door while it is sagging; that loads the hinges further.
- Do stop using it if a hinge is cracked or pulling out of the wall. Hinges do fail: the U.S. Consumer Product Safety Commission has recalled shower doors whose pivot hinges could fail and let the glass panel separate from its frame.
If the glass has already broken, keep out of the shower and see why a glass shower door shatters for what to do next.
Why the fix sometimes does not last
Tightening a sagging door works if the hinge is sound and fixed into something solid. When it drops again soon after, one of these is usually the reason.
Hinges fixed into tile only
Heavy glass needs its hinges fixed into studs or solid blocking behind the tile. Screws held only by tile and drywall slowly pull loose.
A worn hinge
Hinges wear inside, especially self closing ones. A worn hinge can be tightened but will drop again; it needs replacing with a matching part.
A wall that has moved
Settling or a wall that was never plumb puts the door out of line with the fixed panel or the strike side.
Too much load
Towel bars on the glass, people leaning on the door to step out, or a door too big for the hinges chosen.
How we fix it
We support the glass, check the hinges or rollers and what they are fixed into, replace worn parts with matching ones, and set the door level and plumb so it closes, seals and stays put. If the backing is the problem, we tell you before we start. All of this is part of our shower door repair work across Northern Virginia and Maryland. If the door is beyond repair, see glass shower door installation or frameless vs framed shower doors.
- A photo of the whole door, closed, straight on
- Close photos of each hinge or the top rollers
- A photo of the gap along the top and the handle side
- Whether it is frameless, framed or sliding
Sagging shower door questions
More questions? Read which way a shower door should open and whether a shower door can be repaired, browse our glass repair FAQ or contact us.
Why is my glass shower door sagging?
It has dropped on its hinges or pivots. The hinge screws have loosened, a hinge has worn, or the hinges are fixed into tile with no solid backing and are pulling out. On a slider, a worn roller makes the door ride low.
Why won't my shower door close all the way?
Usually because the door has dropped and now rubs the curb or misses the magnet strip, or because the strip has been knocked out of line. A wall or door that is out of plumb can also stop it closing.
Can I tighten the hinges on a frameless shower door myself?
Checking that the hinge screws are snug is fine, but do not loosen them while the door is hanging. The glass is heavy and can drop or swing into the tile, and a knock on the edge of tempered glass can shatter it.
Is a sagging shower door dangerous?
A small drop is not dangerous by itself, but it grinds the bottom edge and loads the hinges. Stop using the door if a hinge is cracked or pulling out of the wall, and have it looked at.
Why does my shower door swing open by itself?
The door or the wall is out of plumb, so the glass swings to its low side, or a self closing hinge has worn. Setting the door plumb or replacing the hinge fixes it.
Shower door dropped or won't close?
Send a photo of the door and its hinges, or call (202) 600-6220.