Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

What Size Mirror Goes Over a Bathroom Vanity?

A mirror over a vanity usually looks best a few inches narrower than the vanity, commonly 4 to 8 inches narrower in total, so 2 to 4 inches in from each side. The other option that works is a mirror that runs the full width of the wall. What looks wrong is a mirror just a little wider or a little narrower than the vanity top. Here is how to size the width and the height, and what changes the numbers.

How wide should the mirror be?

Take the vanity width and take off 4 to 8 inches. That gives you a mirror 2 to 4 inches in from each side, which is the common rule of thumb. Design guides differ a little on the margin, so treat these as starting points.

Vanity widthMirror width to start fromGood to know
24 inches16 to 20 inchesSmall powder rooms; a taller mirror makes the room feel bigger
30 inches22 to 26 inchesLeaves room for a sconce on each side
36 inches28 to 32 inchesThe most common single vanity
48 inches40 to 44 inchesOne mirror, or a mirror wall if the vanity fills the wall
60 inches52 to 56 inches, or two mirrors on a double vanityWith two sinks, two mirrors centered on the sinks usually look better
72 inches and up64 to 68 inches, or two mirrors, or wall to wallLong single mirrors are made in one piece where they fit through the door

On a vanity between two walls, a mirror cut to run wall to wall is the other clean answer. It looks built in and spreads more light around the room. A mirror wider than the vanity but short of the walls is the one size that rarely looks right.

How tall, and how high on the wall?

  • Bottom edge: leave a gap above the faucet and the backsplash, so water does not splash the mirror and the faucet handle clears it.
  • Top edge: line it up with the top of the door or window trim in the room, or stop below the light fixture with space to spare.
  • Height: whatever fits between those two lines. The taller person in the house should see their whole face and shoulders, and the shorter person should not see only the top of their head.
  • Center it on the sink, not the vanity, if the sink is off center.

A taller mirror makes a low or small bathroom feel bigger. A short, wide mirror over a long vanity can make the wall look low.

What changes the size

Measure these before you settle on a size, because each one takes space from the mirror.

Side lights or sconces

Sconces beside the mirror need clear wall on both sides. Measure from the center of each light box, then size the mirror between them.

If an outlet or switch sits where the mirror should go, a custom mirror can be cut around it with a neat cutout, so the mirror does not have to shrink.

A window or a corner

A mirror between a window and a side wall is sized to the space, often with the same gap on both sides.

A medicine cabinet

A recessed cabinet sets the width. A flat mirror beside it, or one long mirror over both, are both options.

One mirror or two over a double vanity?

Both work. Choose by the room:

Two mirrors

Each one centered on its sink, with wall between them for a light. Best when each person has their own side.

One long mirror

Brighter and simpler to clean around. Best with a light bar above and when the vanity fills most of the wall.

The full width of the wall, cut to fit, with cutouts for outlets. Best for a modern bathroom and a small room that needs more light.

Mirrors in a business restroom

For restrooms in shops, offices and restaurants, accessibility rules set the height. The U.S. Access Board’s guide to the ADA Standards on lavatories and sinks measures mirror height to the bottom of the reflecting surface, 40 inches maximum, for a mirror above a lavatory.

A taller mirror, or one that starts low, works for standing people and wheelchair users alike. Check your local code with your contractor or building official before you order.

How to measure for a custom mirror

1. Width

The wall space you want to fill, wall to wall or between lights, plus the vanity width.

2. Height

From the top of the backsplash to the bottom of the light, or to the line you want the top edge on.

3. Obstacles

Where outlets, switches, lights and trim sit, measured from one corner.

4. Photo

A straight on photo of the wall, with the vanity in it.

Send them through the contact form or call (202) 600-6220. We confirm every size on site before cutting. Keep a new mirror looking new: why bathroom mirrors get black edges. How it should be fixed to the wall, and the signs a wall mirror is coming loose. Glass shelves under or beside it: glass shelves.

PHOTO NEEDED (only admins see this): a custom bathroom mirror over a vanity, ideally one with a cutout around an outlet or between two sconces, from a real job. Landscape 1600x1000, WebP.

A common starting point is 28 to 32 inches wide, so the mirror sits 2 to 4 inches in from each side. A mirror that runs the full width of the wall also works.

Usually not. A mirror a few inches narrower than the vanity, or one that runs wall to wall, looks right. A mirror just a little wider than the vanity rarely does.

Leave a gap above the faucet and backsplash so the mirror stays dry, and line the top edge up with the door or window trim or keep it below the light.

Both work. Two mirrors centered on the sinks suit a shared bathroom with a light between them; one long or wall to wall mirror gives more light and is simpler to clean.

Yes. A custom mirror can be cut with a cutout for an outlet or switch, so it does not have to be made smaller to avoid it.

Need a mirror cut to fit?

Send the wall size and a photo, or call (202) 600-6220 for a free estimate.