Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

Can a bathroom mirror sit on the backsplash?

No. A bathroom mirror should not rest on the backsplash or touch the sink back. Water collects along that bottom edge, creeps into the silver backing and turns the edge black. Leave a small gap of at least 10 mm, about 3/8 inch, and hold the mirror up with a channel or clips instead.

What the glass industry says

The National Glass Association’s paper on installation techniques that prolong the life of mirrors says never to install a mirror in contact with a splash board or sink back, and never to let its edges sit in puddles on a backsplash. It asks for at least 10 mm of space between the bottom edge of a mirror and any other surface, so moisture can drain instead of being trapped.

The same paper recommends mechanical fixings, such as J moldings, clips and screws, with a small neoprene pad between the glass and the metal. Adhesive can be added, but only as a helper.

If your mirror already sits on the backsplash

  • Dark spots along the bottom edge mean the silver is already damaged. It won’t reverse, so plan a replacement. See black edges on a bathroom mirror.
  • No damage yet? Wipe the joint dry after each use and keep cleaner off the edge.
  • Replacing it? We cut the new mirror to leave the gap and mount it on a channel or clips.

See custom mirrors for a measured, free estimate.

Mirror edge turning black?

Send us a photo for a free estimate, or call (202) 600-6220.