Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

What plywood do you use to board up windows?

Use wood structural panels, such as plywood, at least 7/16 inch thick, spanning no more than 8 feet. The home building code accepts these in place of storm shutters when they are cut to fit ahead of time, drilled for their fasteners and screwed to the framing around the window, not to the glass or trim.

What the code says

The International Residential Code covers storm protection for glass in section R301.2.1.2 of chapter 3. In areas exposed to flying storm debris, glass must be protected, and wood panels are allowed as long as they meet a few rules.

  • Thickness: not less than 7/16 inch.
  • Span: not more than 8 feet.
  • Prepared ahead: precut, predrilled and kept with the fasteners meant for them.
  • Fastened to the framing around the opening, with the spacing the code table gives.

After the glass is already broken

Boards also keep rain and intruders out once a window has broken. Sweep up the glass first, wearing gloves and shoes, and keep children and pets away. Fasten the board to the frame or wall around the opening, not to the broken glass, and leave it until the new pane is in.

If the break came from an intruder, read what to do after a break-in, or see emergency board up. We answer 24/7.

Window broken right now?

We board up 24/7. Call (202) 600-6220 or send us a photo.