How thick does glass railing glass have to be?
At least nominal 1/4 inch, for every type of glass used in a handrail or guard under the building code. The glass must be laminated, made of tempered or heat strengthened plies, and pass the higher impact test, and the guard is designed with a safety factor of four on its loads.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Building Code covers this in section 2407.1 of chapter 24.
- Minimum: nominal 1/4 inch for all glazing types.
- Glass type: laminated, built of fully tempered or heat strengthened glass.
- Impact: the higher impact category of the safety glazing test.
- Exception: single tempered glass where nothing walks below or the area below is protected.
Why thickness is only a start
The 1/4 inch figure is a floor. The panel also has to carry the code loads with a safety factor of four, so the thickness for a given span comes from the railing design. Measure the old panel and note the base shoe or clamp size before ordering a replacement.
Read what to do about a cracked glass railing panel, or see glass railings for a free estimate.
Related questions
- When does a deck or balcony need a railing?
- How tall does a deck or balcony railing have to be?
- How tall does a commercial glass railing have to be?
- How big can the gaps be in a glass railing?
- Does a glass railing need a top rail?
- All glass repair questions
From other topics
- Is heat strengthened glass the same as tempered glass? (the two ply types)
Need a replacement railing panel?
Send us a photo and the panel size for a free estimate, or call (202) 600-6220.