Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

How thick does jalousie window glass need to be?

At least nominal 3/16 inch thick, says the home code, for regular, float, wired or patterned glass in jalousie and louvered windows. Each louver can be no more than 48 inches long, its exposed edges must be smooth, and wired glass with wire showing along its long edges is not allowed.

What the code says

The International Residential Code covers louvers in section R308.2 of chapter 3.

  • Thickness: nominal 3/16 inch at least.
  • Length: 48 inches at most.
  • Edges: exposed edges smooth.
  • Wired glass: not allowed with wire exposed on the long edges.
  • Impact test: louvers follow this section instead of the safety glass test.

The rule covers regular, float, wired and patterned glass.

Replacing a louver

Measure the length and width of a louver that is still whole, to the nearest sixteenth of an inch, and note whether its edges are ground smooth. Bring the old blade if you can, so the new one matches its thickness and pattern. Count every cracked blade, so they can all be cut and edged at once. Keep the metal clips that hold each blade.

Read how to measure window glass, or see window glass repair for a free estimate.

Louver cracked or missing?

Send us a photo and the size for a free estimate, or call (202) 600-6220.