How high should a pool gate latch be?
At a home pool, a latch release reached from outside the fence must sit at least 54 inches above the ground, says the pool and spa code. If the only release is on the pool side, it must sit at least 3 inches below the top of the gate.
- Free estimates
- Open 24/7
- Hablamos español
What the code says
The International Swimming Pool and Spa Code covers this in sections 305.3.3 and 305.3.4 of chapter 3.
- Home pools, reached from outside: 54 inches up at least.
- Home pools, keyed or keypad locks: 54 inches up at most.
- Release only on the pool side: at least 3 inches below the top of the gate.
- Near an inside latch: openings within 18 inches of it are half an inch at most.
- Public pools: their own height ranges in the same section.
Latches on glass gates
With glass panels the small opening rule mostly concerns the gaps between the gate, the hinge panel and the latch post. Check those gaps after any panel or hinge is replaced.
Read what to do about a cracked glass railing panel, or see glass railings for a free estimate.
Related questions
- How tall does a glass pool fence have to be?
- How big can the gaps be in a glass pool fence?
- How far should pool equipment be from the pool fence?
- Which way should a pool gate open?
- Can a house wall with glass doors be part of a pool barrier?
- All glass repair questions
From other topics
- How high should a commercial door handle be? (handle height on commercial doors)
Pool gate latch not catching?
Send us a photo for a free estimate, or call (202) 600-6220.