Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

Cracked or Broken Glass Office Partition: What to Do, and How a Panel Is Replaced

Keep people from leaning on or brushing past a cracked partition panel, mark it off, and report it to whoever manages the space right away. A cracked tempered panel can break into small pieces at any time; a cracked laminated or filmed panel holds together but has lost strength. Either way the panel is replaced, not repaired, and usually without taking the rest of the wall down. Here is how to handle it in a working office.

What kind of glass is cracked?

Office partitions are made of safety glass, and how a panel cracks tells you which kind it is and how urgent it is.

Tempered glass does not crack in a line and stay put for long. If it has started to break into small pieces, or a crack runs across the whole panel, it can fall out at any moment. Keep people clear.

Laminated glass cracks like a windshield and stays in the frame, held by its interlayer. It is not about to fall, but it has lost strength and should be replaced.

Cracked glass behind a film or graphic

Many partitions carry frosted film or a logo. Film holds broken glass together, so a filmed tempered panel can look intact while it is cracked all over. Look closely before anyone touches it.

Who does what

In an office, the person who finds the crack is rarely the one who orders the glass. A clear order of steps keeps it quick.

1. Whoever finds it

Keep people away from that panel, move chairs and desks back from it, and tell the office manager or facilities. Do not tape over a tempered panel that is breaking up and then keep using the space next to it.

2. The office manager

Put up a sign or a barrier, take photos of the whole partition and the crack, and note when it was found and anything that hit it. Then report it to the landlord or property manager.

3. The landlord or property manager

Check who is responsible under the lease. Partitions installed as part of a tenant fit-out are often the tenant’s; base building glass is often the landlord’s. The lease says which.

4. The glass company

Measures the panel and its fixings, makes the area safe if needed, orders the new panel to size and fits it, out of hours if the office asks.

If the glass has already broken

Close off the area and keep people out until the broken glass is cleared. Wear gloves and closed shoes, pick up the larger pieces first and vacuum the small cubes from carpet; tempered glass cubes travel further than you expect. The full method is in how to clean up broken glass safely.

Do not put broken glass loose in an office trash bag, where cleaning staff can be cut. University safety offices set out the standard method: Clemson University’s broken glass fact sheet, for example, has broken glass go in a rigid, puncture resistant container marked Caution Broken Glass, taped shut before it goes out.

We answer 24/7 for an opening that needs to be made safe: emergency glass repair.

How a cracked partition panel is replaced

Most partitions are built so one panel can come out without touching its neighbors. What the job involves depends on how yours is built. More on the systems themselves: glass office partitions.

Partition typeHow a panel is heldWhat replacing one involves
Framed partitionAluminum frame with glazing beads or gasketsBeads come off, old panel out, new panel set in fresh gaskets
Frameless glass wallFloor and ceiling channels, glass joined edge to edgeJoint seals cut, panel lifted out of the channels, new panel set and resealed
Glass door in the partitionPatch fittings or rails, pivots or hingesHoles and notches cut before tempering, hardware moved to the new glass
Panel with film or a logoEither of the aboveNew film or graphic applied after the glass, matched to the rest

Every panel is made to order: tempered or laminated, the same thickness as the rest, with any holes for door hardware cut before it is tempered. Until it arrives, a cracked laminated panel can usually stay in place behind a barrier; a tempered panel that is breaking up is taken out and the opening closed off. Fitting is done at a time agreed with the office.

Why partition glass cracks, and how to stop it happening again

  • Knocks at the edges: chairs, carts and furniture moves. Bumpers or a stand off rail along a busy route help.
  • A door that slams against a glass panel or its stop. A door closer that is adjusted, or a stop that holds the door off the glass, fixes it: see commercial glass door repair.
  • Glass touching metal in a channel or frame after the building has moved slightly.
  • Things fixed to the glass: heavy whiteboards, shelves or screens that load one spot.
  • No clear cause: tempered glass occasionally breaks from a tiny flaw in the glass.

Still deciding whether glass is right for a space? See glass office partitions vs drywall.

What to send us

With photos we can tell you how urgent it is and what the new panel needs. We replace partition glass for offices across Northern Virginia and Maryland, as part of our commercial glass work.

PHOTO NEEDED (only admins see this): an office glass partition with one cracked panel marked off behind a barrier, and the same run with the new panel fitted, from a real job. Landscape 1600x1000, WebP.

It should be treated as unsafe until it is replaced. A cracked tempered panel can break into small pieces at any time, and a cracked laminated panel holds together but has lost strength. Keep people away and mark it off.

It depends on the lease. Partitions put in for a tenant fit-out are often the tenant’s responsibility, and base building glass is often the landlord’s. Report it to the property manager and check the lease.

Usually, yes. Framed and frameless partitions are built so one panel can come out of its frame or channels and a new panel made to size can go in, without taking down the rest of the wall.

Once the new panel is made, fitting is done at a time agreed with the office. We answer 24/7 if an opening has to be made safe first.

Common causes are knocks at the edges from chairs and furniture, a door slamming against the glass, glass touching metal in its frame, and heavy items fixed to the panel. Tempered glass can also break from a tiny flaw.

Cracked partition glass in your office?

Send a photo of the panel, or call (202) 600-6220. We answer 24/7.