Open 24/7Licensed in VirginiaInsured and bonded

Call (202) 600-6220

Is Low-E Glass Worth It for Your Home?

For most homes in Northern Virginia and Maryland, yes: when a double pane unit is being replaced anyway, choosing low-E glass is usually the simplest comfort upgrade available, because the new unit is being made to order regardless. It matters most on windows that get strong sun and in rooms that feel cold next to the glass in winter. Here is what it does in each season, which pane the coating goes on, and the few cases where it is not the right call.

What low-E does in summer and in winter

A low-E coating is a very thin metal layer that lets daylight through but reflects heat. The same window does two different jobs during the year.

Summer

It reflects much of the sun’s heat before it gets into the room. South and west windows that make a room hot in the afternoon gain the most.

Winter

It reflects the room’s heat back inside, so the inner pane stays warmer. The cold draft feeling next to a big window is often just cold glass, and low-E helps there.

A warmer inner pane also fogs less on cold mornings. Our post on condensation inside windows explains why cold glass sweats.

Which side of the glass the coating goes on

In a double pane unit the coating sits on one of the two faces inside the sealed gap, where it can’t be scratched or cleaned off. Which pane it goes on changes what it does best:

  • On the outer pane, facing the gap: stops more of the sun’s heat before it reaches the room. The usual choice for sunny south and west windows.
  • On the inner pane, facing the gap: keeps more of the room’s heat in and lets more winter sun through. A fit for north facing or shaded windows in rooms that run cold.

The number that shows the difference is the solar heat gain coefficient, or SHGC, on the window label. The National Fenestration Rating Council, which runs that label, explains that a low solar heat gain coefficient resists solar heat and a high one lets it in.

You can’t see or feel the coating. A quick check: hold a small light near the glass at night and look at the reflections. The reflection off the coated face often looks a slightly different color from the others.

When to choose low-E on a glass replacement

Answer it one window at a time. Which way it faces and what is wrong with the frame decide more than any average. Older house with single pane glass? Read single pane vs double pane: is upgrading worth it.

Your windowLow-E worth it?What to ask for
South or west, hot in the afternoonYes, the mostA low SHGC coating that blocks more sun heat
North facing or shaded, cold in winterYesA coating that keeps heat in and still lets light through
One fogged unit in a row of clear windowsUsually, if the look matchesSee the glass next to the old one first; some coatings look slightly tinted
Whole house of old double pane unitsYes, if the frames are soundNew low-E units in the existing frames, starting with the sunniest side
Frames rotten, drafty or failingNot on its ownA new window with low-E built in
Single pane frame that can’t take a sealed unitLess soAsk whether a slim unit fits; if not, plain single pane is the honest answer

When low-E is not the fix

  • The draft is air, not glass. If you feel moving air around the sash, the problem is seals and weatherstrip. Low-E glass does nothing for air leaks.
  • The frame is the problem. New glass in a rotten or failing frame is money spent in the wrong place. See window replacement.
  • You want the clearest possible view. Most coatings are close to invisible, but some give a faint tint or reflection. If that matters, ask to see the glass before it is ordered.

We don’t promise a number on your energy bill. How much low-E saves depends on the house, the windows and how you heat and cool it, so a fixed percentage quoted for every home won’t tell you much about yours.

How we fit low-E glass in your existing frames

When a double pane unit has fogged, cracked or lost its seal, we replace the sealed unit, made to the size and depth of your frame, and you choose clear or low-E. See double pane glass replacement for how the unit is measured and fitted, and low-E glass for the coating types. New installations carry a 90-day warranty.

PHOTO NEEDED (only admins see this): two double pane windows side by side, one clear and one low-E, showing the slight difference in reflection, from a real job. Landscape 1600x1000, WebP.

For most homes, yes, especially when a double pane unit is being replaced anyway. It helps most on sunny south and west windows and in rooms that feel cold next to the glass.

Both. In summer it reflects the sun’s heat outside; in winter it reflects the room’s heat back in, so the inside pane stays warmer.

In a double pane unit it sits inside the sealed gap. On the outer pane it blocks more sun heat; on the inner pane it keeps more heat in and lets more winter sun through.

Usually. If the frames are sound, the old sealed unit is replaced with a new low-E unit made to fit the same frame.

It can. Some coatings give a faint tint or reflection. Ask to see the glass next to your existing windows before it is ordered.

Replacing a fogged or cracked unit?

Ask about low-E when you send the photo, or call (202) 600-6220 for a free estimate.